Product name: Single-side Building Terminals
Commodity Origin: China
Product Model: 222
Product Category: Building Decoration Wiring Connector
Channel Number: 2P/3P/4P/5P/8P
Rated Voltage: 250V
Rated Current: 20A
connectable wire section range [mm2]: 0.75-2.5
connectable wire section range [AWG]: 18-12AWG
wiring method: plug-in
wiring direction: front
pollution level: 2
can withstand instantaneous peak voltage: 4KV
insulation material: PA
flame retardant rating: UL94 V-0 or (V-2)
stripping length: 12-13mm
stripping length range: 0.47in
. Safety-There is no danger of loose wires and embrittlement of tape, transparent and safe to see.
. Convenient-with test holes, there is no need to remove the tape to measure voltage.
. Fast-plug in directly, pull out if you make a wrong connection, and connect again.
. Reliable-each contact has an independent shrapnel, and different wire diameters can also be used for safe short-circuiting.
. PA 6.6 material, permanent temperature resistance 105℃, no embrittlement.
. Maximum 4mm/ 32A/ 400V can be connected.
. Strip 9-11mm of insulation for single core wire and stranded wire.
. Use your thumb to move the orange lever up to open the spring box.
. Insert the wire through the spring box opening.
. Press down the orange pressure rod and the wire will be clamped automatically.
Wire removal method:
Use your thumb to move the orange pressure rod upwards to remove the wire.
1 x 2P/3P/4P/5P/8P Single-side Building Terminals